Product: 3 ″ Z-Vent Fire Stop Support
Manufacturer: Z-FLEX
Part Number: 2SVSFSSF03
Price: $29.95
Status: In Stock.
Description: Z-Vent is a factory built, engineered AL29-4C special gas vent pipe, suitable for positive or negative pressure. Z-Vent is UL tested and listed to UL1738/S636. CAT II, III, IV venting approved. Used as a fire stop and support on a vertical installation
Product: 3 ″ Z-Vent Rain Cap
Manufacturer: Z-FLEX
Part Number: 2SVSRCF03
Price: $50.74
Status: In Stock.
Description: Z-Vent is a factory built, engineered AL29-4C special gas vent pipe, suitable for positive or negative pressure. Z-Vent is UL tested and listed to UL1738/S636. CAT II, III, IV venting approved. Vertical rain cap termination. Cap has built it storm coll
Product: 4 ″ Z-Vent Fire Stop Support
Manufacturer: Z-FLEX
Part Number: 2SVSFSSF04
Price: $37.95
Status: In Stock.
Description: Z-Vent is a factory built, engineered AL29-4C special gas vent pipe, suitable for positive or negative pressure. Z-Vent is UL tested and listed to UL1738/S636. CAT II, III, IV venting approved. Used as a fire stop and support on a vertical installation
Product: 3 ″ Z-Vent Chimney/Flat Roof Flashing
Manufacturer: Z-FLEX
Part Number: 2SVSSCSF03
Price: $33.5
Status: In Stock.
Description: Z-Vent is a factory built, engineered AL29-4C special gas vent pipe, suitable for positive or negative pressure. Z-Vent is UL tested and listed to UL1738/S636. CAT II, III, IV venting approved. Flashing for use in flat roof or chimney application.
Product: 3 ″ Z-Vent Vent Termination Box
Manufacturer: Z-FLEX
Part Number: 2SVSRTF03
Price: $34.37
Status: In Stock.
Description: Z-Vent is a factory built, engineered AL29-4C special gas vent pipe, suitable for positive or negative pressure. Z-Vent is UL tested and listed to UL1738/S636. CAT II, III, IV venting approved. Flashing for use in flat roof or chimney application.
Product: 3 ″ Z-Vent Modine Hot Dawg Adapter
Manufacturer: Z-FLEX
Part Number: 2SVSAHD03
Price: $19.43
Status: In Stock.
Description: Z-Vent is a factory built, engineered AL29-4C special gas vent pipe, suitable for positive or negative pressure. Z-Vent is UL tested and listed to UL1738/S636. CAT II, III, IV venting approved. Flashing for use in flat roof or chimney application.
Product: 3 ″ x 4 ″ Z-Vent Increaser
Manufacturer: Z-FLEX
Part Number: 2SVSI0304
Price: $26.23
Status: In Stock.
Description: Z-Vent is a factory built, engineered AL29-4C special gas vent pipe, suitable for positive or negative pressure. Z-Vent is UL tested and listed to UL1738/S636. CAT II, III, IV venting approved. Flashing for use in flat roof or chimney application.
Product: 3 ″ Z-Vent Adjustable Wall Thimbles (10 ″ x 10 ″) (Adjust from 4 ″ to 7 ″)
Manufacturer: Z-FLEX
Part Number: 2SVSWTF03
Price: $27.69
Status: In Stock.
Description: Z-Vent is a factory built, engineered AL29-4C special gas vent pipe, suitable for positive or negative pressure. Z-Vent is UL tested and listed to UL1738/S636. CAT II, III, IV venting approved. Flashing for use in flat roof or chimney application.
Product: 3 ″ Z-Vent Vent Termination Coupling (Weil Mclain)
Manufacturer: Z-FLEX
Part Number: 2SVSTPF03
Price: $16.06
Status: In Stock.
Description: Z-Vent is a factory built, engineered AL29-4C special gas vent pipe, suitable for positive or negative pressure. Z-Vent is UL tested and listed to UL1738/S636. CAT II, III, IV venting approved. Flashing for use in flat roof or chimney application.
Product: 3 ″ Z-Vent Weil Mclain CGI Starter
Manufacturer: Z-FLEX
Part Number: 2SVEWMFAF03
Price: $27.53
Status: In Stock.
Description: Z-Vent is a factory built, engineered AL29-4C special gas vent pipe, suitable for positive or negative pressure. Z-Vent is UL tested and listed to UL1738/S636. CAT II, III, IV venting approved. Flashing for use in flat roof or chimney application.